Safety shoes Albatros Voltage QL S1P
  • Safety shoes Albatros Voltage QL S1P
  • Safety shoes Albatros Voltage QL S1P
  • Safety shoes Albatros Voltage QL S1P
  • Safety shoes Albatros Voltage QL S1P
  • Safety shoes Albatros Voltage QL S1P
  • Safety shoes Albatros Voltage QL S1P
Albatros

Safety shoes Albatros Voltage QL S1P

€114.99
€124.99
-8%
Tax included

The lowest price of the product €114.99 in day 30.03.2023

Lowest price in the last 30 days

Available from 15 December 2022

Color
  • Black
Size
41
41
42
43
44
45
46
Size Guide

Don't know how to pick up the right size? Check our size table!



SIZESOLE LENGTH [CM]MAX. FOOT LENGTH [CM]
36 23,5 23
37 24,2-24,5 23,7-24
38 24,8 24,3
39 25,1-25,5 24,6-25
40 26,2 25,7
41 26,5-26,9 26-26,4
42 27,5 27
43 27,9-28,2 27,4-27,7
44 28,9 28,4
45 29,2-29,5 28,7-29
46 30,2 29,7
47 30,5-30,8 30-30,3



Our sizing tips

Remember, if you miss the correct size, you can always return the purchased products to us and you have up to 101 days * to do so! Take advantage of the easy return via the website quick returns or send us the returned product on your own.

Important when choosing the size of clothing

How to measure yourself in the chest? Use a tailor's tape measure to measure the circumference of the fullest part of the chest. Take the measurement in underwear, a thin T-shirt, etc. - a thick sweatshirt may distort the result.

How to measure yourself at the waist? Forget about measuring with a tape measure, unfortunately it will not work. Take a tailor's tape measure and measure the circumference of your waist where you usually wear pants. Check whether the trousers you are viewing have waist adjustments or an elastic waist system and take this into account when measuring and selecting the sizes.

How to measure yourself in the hips? Some manufacturers give an additional value in the size charts - this is the circumference of the hips. Use a tailor's tape measure to measure the circumference at its widest point. Take the measurement in underwear - trousers, e.g. with holster pockets, may distort the result.

How to measure the length of the leg? Lay your pants flat and measure the distance from the crotch to the bottom of the leg with a tape measure or tape measure. Remember the result and compare it with the leg lengths shown in the table. This way you will decide whether to choose a standard, short or extended size.

Important when choosing the size of shoes

For work shoes where we spend most of the day, choosing the right size is especially important. Here are our tips:

Put on the sock that you will wear with your shoes (especially if you use thicker socks, e.g. hiking socks), then place your foot on an A4 sheet of paper placed on the floor and outline its shape. Compare the length of the section between the edge of the heel and the farthest toe with the manufacturer's size chart.

Note that the toecap in work shoes reduces the possibility of the shoe 'shattering'.

The time of measurement is also important - in the evening the rate is higher than in the morning, so we recommend measuring at the end of the working day.

INSTRUCTIONS FOR MEASURING THE FEET

If you have doubts about how to measure your foot, you can use our measurement formula, which you can find by clicking on the link above "foot measurement instructions". Most often, thanks to these steps, our clients manage to choose the perfect size.

Size Guide

Don't know how to pick up the right size? Check our size table!



SIZESOLE LENGTH [CM]MAX. FOOT LENGTH [CM]
36 23,5 23
37 24,2-24,5 23,7-24
38 24,8 24,3
39 25,1-25,5 24,6-25
40 26,2 25,7
41 26,5-26,9 26-26,4
42 27,5 27
43 27,9-28,2 27,4-27,7
44 28,9 28,4
45 29,2-29,5 28,7-29
46 30,2 29,7
47 30,5-30,8 30-30,3



Our sizing tips

Remember, if you miss the correct size, you can always return the purchased products to us and you have up to 101 days * to do so! Take advantage of the easy return via the website quick returns or send us the returned product on your own.

Important when choosing the size of clothing

How to measure yourself in the chest? Use a tailor's tape measure to measure the circumference of the fullest part of the chest. Take the measurement in underwear, a thin T-shirt, etc. - a thick sweatshirt may distort the result.

How to measure yourself at the waist? Forget about measuring with a tape measure, unfortunately it will not work. Take a tailor's tape measure and measure the circumference of your waist where you usually wear pants. Check whether the trousers you are viewing have waist adjustments or an elastic waist system and take this into account when measuring and selecting the sizes.

How to measure yourself in the hips? Some manufacturers give an additional value in the size charts - this is the circumference of the hips. Use a tailor's tape measure to measure the circumference at its widest point. Take the measurement in underwear - trousers, e.g. with holster pockets, may distort the result.

How to measure the length of the leg? Lay your pants flat and measure the distance from the crotch to the bottom of the leg with a tape measure or tape measure. Remember the result and compare it with the leg lengths shown in the table. This way you will decide whether to choose a standard, short or extended size.

Important when choosing the size of shoes

For work shoes where we spend most of the day, choosing the right size is especially important. Here are our tips:

Put on the sock that you will wear with your shoes (especially if you use thicker socks, e.g. hiking socks), then place your foot on an A4 sheet of paper placed on the floor and outline its shape. Compare the length of the section between the edge of the heel and the farthest toe with the manufacturer's size chart.

Note that the toecap in work shoes reduces the possibility of the shoe 'shattering'.

The time of measurement is also important - in the evening the rate is higher than in the morning, so we recommend measuring at the end of the working day.

INSTRUCTIONS FOR MEASURING THE FEET

If you have doubts about how to measure your foot, you can use our measurement formula, which you can find by clicking on the link above "foot measurement instructions". Most often, thanks to these steps, our clients manage to choose the perfect size.

Quantity

  Last items in stock

Free delivery for orders over 50 euro

Available on stock 1

Dispatch in 24 hours

Up to 101 days for a free return

 

Payment secured by Stripe and Paypal

 

Secured by SSL and Cloudfare

 

100% Original products

Get Reward Points

Hey! buy this product and collect 11 Reward Points of worth €1.00

Add to wishlist

A new edition of safety shoes from the well-known Albatros brand. The Voltage QL model with protection class S3 is a combination of modern, sporty design and excellent protection.

Product features:

  • ensure maximum breathability,
  • made of breathable textile fabric,
  • reinforced with microfiber and TPU,
  • breathable lining,
  • midsole with PWR BEADS®,
  • free of metal elements,
  • composite toe cap and FAP® puncture-resistant insert,
  • slip and heat resistant up to 300°C,
  • meet the requirements of S1P, ESD standards,
  • manufacturer code: 647670.

The Albatros Voltage QL men's safety shoes are distinguished by a modern, interesting design that will undoubtedly catch the eye of others. The high-tech PWR BEADS® midsole provides excellent 58% energy return for exceptional cushioning and all-day comfort. The rubber outsole is resistant to slipping and short-term exposure to high temperatures up to 300 ° C. The composite toecap provides excellent impact protection, while the penetration-resistant FAP midsole provides greater comfort, flexibility, insulation, moisture absorption and shock absorption. The model is devoid of metal elements. Made of extremely breathable textile fabric with microfiber and TPU reinforcements. Additionally equipped with a breathable, functional lining, thanks to which the Albatros safety shoes provide maximum breathability.

Product Details

4051428107792
Use email address to get notification when product back in stock

Data sheet

Footwear protection class
S1P
Toe cap
Composite
Material
Synthetic
Anti-puncture insert
Yes
Fitting system
BOA
Waterproof membrane
No
Standard
ESD

Returns FAQ:

1. Do you offer free returns?

Yes you can return product using free return label or send your parcel to our natonal warehouse in your country.

2. How can I exchange my product?

Well the best way is to just purchase the one you like and shipp back the item that you don't like. We do not "exchange" products.

3. How long I have to wait to be refunded?

Usually we need 3-4 days to refund your order. Please be sure you filled in and attached your return form. It will make a huge difference for processing your refund.

4. Do I need original invoice to return my order?

Sure you do not! As long as you have an order number, return form or any other identifier for your order we will find you and we will refund you!

Warranty FAQ:

  • What is the warranty for my order? 24 months.
  • When will I get an answer for my warranty claim? No longer than 14 days.
  • Do I need an invoice or receipt to file a claim? No.
  • Do I need to send product to Baltic Workwear? No. Most of claims we do via our electronic system. All you need to do is provide us good quality pictures of product. 
  • Do I pay for warranty procedure? No. It is free.
  • Do I need an original box? No.

Other products in the same category...

Check our other products recomended for you...

Questions


Send us your question

Be the first to ask a question about this product!

Consult, revoke or modify data

Question about the product

* Required fields
(read)

Product Comments

Comments (0)