Safety shoes Albatros Lift Impulse S1P ESD
  • Safety shoes Albatros Lift Impulse S1P ESD
  • Safety shoes Albatros Lift Impulse S1P ESD
  • Safety shoes Albatros Lift Impulse S1P ESD
  • Safety shoes Albatros Lift Impulse S1P ESD
Albatros

Albatros Lift Impulse S1P ESD safety shoes

(9)
Write your review
€79.99
€94.99
-16%
Tax included

The lowest price of the product €79.99 in day 18.04.2024

Lowest price in the last 30 days

Color
  • Blue
  • Red
Size
40
39
40
41
42
43
44
45
46
47
Size Guide

buty-tabela-rysunek.png

SIZETHE LENGTH OF THE INSERT [CM]WIDTH IN THE WIDEST PLACE [CM]
40 26 9
41 27 9
42 27,5 9
43 28,5 9,5
44 29 10
45 29,5 10
46 30 10
47 31 10

Our sizing tips

Remember, if you miss the correct size, you can always return the purchased products to us and you have up to 101 days * to do so! Take advantage of the easy return via the website quick returns or send us the returned product on your own.

Important when choosing the size of clothing

How to measure yourself in the chest? Use a tailor's tape measure to measure the circumference of the fullest part of the chest. Take the measurement in underwear, a thin T-shirt, etc. - a thick sweatshirt may distort the result.

How to measure yourself at the waist? Forget about measuring with a tape measure, unfortunately it will not work. Take a tailor's tape measure and measure the circumference of your waist where you usually wear pants. Check whether the trousers you are viewing have waist adjustments or an elastic waist system and take this into account when measuring and selecting the sizes.

How to measure yourself in the hips? Some manufacturers give an additional value in the size charts - this is the circumference of the hips. Use a tailor's tape measure to measure the circumference at its widest point. Take the measurement in underwear - trousers, e.g. with holster pockets, may distort the result.

How to measure the length of the leg? Lay your pants flat and measure the distance from the crotch to the bottom of the leg with a tape measure or tape measure. Remember the result and compare it with the leg lengths shown in the table. This way you will decide whether to choose a standard, short or extended size.

Important when choosing the size of shoes

For work shoes where we spend most of the day, choosing the right size is especially important. Here are our tips:

Put on the sock that you will wear with your shoes (especially if you use thicker socks, e.g. hiking socks), then place your foot on an A4 sheet of paper placed on the floor and outline its shape. Compare the length of the section between the edge of the heel and the farthest toe with the manufacturer's size chart.

Note that the toecap in work shoes reduces the possibility of the shoe 'shattering'.

The time of measurement is also important - in the evening the rate is higher than in the morning, so we recommend measuring at the end of the working day.

INSTRUCTIONS FOR MEASURING THE FEET

If you have doubts about how to measure your foot, you can use our measurement formula, which you can find by clicking on the link above "foot measurement instructions". Most often, thanks to these steps, our clients manage to choose the perfect size.

Size Guide

buty-tabela-rysunek.png

SIZETHE LENGTH OF THE INSERT [CM]WIDTH IN THE WIDEST PLACE [CM]
40 26 9
41 27 9
42 27,5 9
43 28,5 9,5
44 29 10
45 29,5 10
46 30 10
47 31 10

Our sizing tips

Remember, if you miss the correct size, you can always return the purchased products to us and you have up to 101 days * to do so! Take advantage of the easy return via the website quick returns or send us the returned product on your own.

Important when choosing the size of clothing

How to measure yourself in the chest? Use a tailor's tape measure to measure the circumference of the fullest part of the chest. Take the measurement in underwear, a thin T-shirt, etc. - a thick sweatshirt may distort the result.

How to measure yourself at the waist? Forget about measuring with a tape measure, unfortunately it will not work. Take a tailor's tape measure and measure the circumference of your waist where you usually wear pants. Check whether the trousers you are viewing have waist adjustments or an elastic waist system and take this into account when measuring and selecting the sizes.

How to measure yourself in the hips? Some manufacturers give an additional value in the size charts - this is the circumference of the hips. Use a tailor's tape measure to measure the circumference at its widest point. Take the measurement in underwear - trousers, e.g. with holster pockets, may distort the result.

How to measure the length of the leg? Lay your pants flat and measure the distance from the crotch to the bottom of the leg with a tape measure or tape measure. Remember the result and compare it with the leg lengths shown in the table. This way you will decide whether to choose a standard, short or extended size.

Important when choosing the size of shoes

For work shoes where we spend most of the day, choosing the right size is especially important. Here are our tips:

Put on the sock that you will wear with your shoes (especially if you use thicker socks, e.g. hiking socks), then place your foot on an A4 sheet of paper placed on the floor and outline its shape. Compare the length of the section between the edge of the heel and the farthest toe with the manufacturer's size chart.

Note that the toecap in work shoes reduces the possibility of the shoe 'shattering'.

The time of measurement is also important - in the evening the rate is higher than in the morning, so we recommend measuring at the end of the working day.

INSTRUCTIONS FOR MEASURING THE FEET

If you have doubts about how to measure your foot, you can use our measurement formula, which you can find by clicking on the link above "foot measurement instructions". Most often, thanks to these steps, our clients manage to choose the perfect size.

Quantity

  Available for immediate dispatch

Free shipping available

Delivery time 2-3 business days

Up to 101 days for a free return

No queries yet, leave the first!
 

Shipping in 24H - on stock items

Get Reward Points

Hey! buy this product and collect 8 Reward Points of worth €0.80

Model: Lift Red Impulse / Lift Blue Impulse / Lift Gray Impulse

Upper: durable 3D mesh

Lining: breathable

Sole: Dual Impulse - heat-resistant, non-slip, IMPULSE.FOAM ® midsole

Toe cap: fiberglass

Clasp type: lace-up

Protection class: S1P

Color: black and red / black and blue / gray

Requirements: in accordance with EN ISO 20345: 2011, S1P, SRA, ESD

 

Albatros Lift Red Impulse S1P ESD safety shoes - sporty style

Very light and flexible shoes that resemble sports shoes of famous brands. However, when we look at the technical specification of the Albatros Lift Red Impulse shoes, we notice that they meet the S1P standard thanks to the use of a Kevlar toe cap and an anti-puncture insole. The breathable lining and the upper allow the use of these shoes in all kinds of production and assembly halls as well as in transport. The entire shoe is metal-free and meets the ESD standard - the shoe is anti-electrostatic!

Product features:

  • made of breathable material,
  • fiberglass toe cap,
  • fiberglass anti-puncture insert,
  • antistatic properties,
  • sole compliant with the SRA standard,
  • resistant to short exposure to high temperature (up to 300 degrees).

Product Details

Albatros
4051428068284

Data sheet

Footwear protection class
S1P
Toe cap
Composite
Material
Synthetic
Anti-puncture insert
Yes
Fitting system
Laces
Waterproof membrane
No
Standard
ESD
SRA
Weight of 1 shoe, size 42 (g)
530

Returns FAQ:

1. Do you offer free returns?

Yes you can return product using free return label or send your parcel to our natonal warehouse in your country.

2. How can I exchange my product?

Well the best way is to just purchase the one you like and shipp back the item that you don't like. We do not "exchange" products.

3. How long I have to wait to be refunded?

Usually we need 3-4 days to refund your order. Please be sure you filled in and attached your return form. It will make a huge difference for processing your refund.

4. Do I need original invoice to return my order?

Sure you do not! As long as you have an order number, return form or any other identifier for your order we will find you and we will refund you!

Warranty FAQ:

  • What is the warranty for my order? 24 months.
  • When will I get an answer for my warranty claim? No longer than 14 days.
  • Do I need an invoice or receipt to file a claim? No.
  • Do I need to send product to Baltic Workwear? No. Most of claims we do via our electronic system. All you need to do is provide us good quality pictures of product. 
  • Do I pay for warranty procedure? No. It is free.
  • Do I need an original box? No.

Other products in the same category...

Check our other products recomended for you...

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

Product Comments

Comments (9)
(9)

You might also like