BASE RAFTING TOP S3 SRC work ankle boots
Base Protection

BASE RAFTING TOP S3 SRC safety boots

€76.99
€104.99
-27%
Tax included

The lowest price of the product €76.99 in day 29.03.2024

Lowest price in the last 30 days

Size
46
40 Shipping 48H
41
42
43
44
45
46
47
Size Guide

Don't know how to pick up the right size? Check our size table!



SIZESOLE LENGTH [CM]MAX. FOOT LENGTH [CM]
35 22,2 21,7
36 22,3 21,8
37 23,6 23,1
38 24,2 23,7
39 24,9 24,4
40 25,6 25,1
41 26,2 25,7
42 26,8 26,3
43 27,5 27
44 28,1 27,6
45 28,8 28,3
46 29,4 28,9
47 30 29,5
48 30,7 30,2
49 31,4 30,9



Our sizing tips

Remember, if you miss the correct size, you can always return the purchased products to us and you have up to 101 days * to do so! Take advantage of the easy return via the website quick returns or send us the returned product on your own.

Important when choosing the size of clothing

How to measure yourself in the chest? Use a tailor's tape measure to measure the circumference of the fullest part of the chest. Take the measurement in underwear, a thin T-shirt, etc. - a thick sweatshirt may distort the result.

How to measure yourself at the waist? Forget about measuring with a tape measure, unfortunately it will not work. Take a tailor's tape measure and measure the circumference of your waist where you usually wear pants. Check whether the trousers you are viewing have waist adjustments or an elastic waist system and take this into account when measuring and selecting the sizes.

How to measure yourself in the hips? Some manufacturers give an additional value in the size charts - this is the circumference of the hips. Use a tailor's tape measure to measure the circumference at its widest point. Take the measurement in underwear - trousers, e.g. with holster pockets, may distort the result.

How to measure the length of the leg? Lay your pants flat and measure the distance from the crotch to the bottom of the leg with a tape measure or tape measure. Remember the result and compare it with the leg lengths shown in the table. This way you will decide whether to choose a standard, short or extended size.

Important when choosing the size of shoes

For work shoes where we spend most of the day, choosing the right size is especially important. Here are our tips:

Put on the sock that you will wear with your shoes (especially if you use thicker socks, e.g. hiking socks), then place your foot on an A4 sheet of paper placed on the floor and outline its shape. Compare the length of the section between the edge of the heel and the farthest toe with the manufacturer's size chart.

Note that the toecap in work shoes reduces the possibility of the shoe 'shattering'.

The time of measurement is also important - in the evening the rate is higher than in the morning, so we recommend measuring at the end of the working day.

INSTRUCTIONS FOR MEASURING THE FEET

If you have doubts about how to measure your foot, you can use our measurement formula, which you can find by clicking on the link above "foot measurement instructions". Most often, thanks to these steps, our clients manage to choose the perfect size.

Size Guide

Don't know how to pick up the right size? Check our size table!



SIZESOLE LENGTH [CM]MAX. FOOT LENGTH [CM]
35 22,2 21,7
36 22,3 21,8
37 23,6 23,1
38 24,2 23,7
39 24,9 24,4
40 25,6 25,1
41 26,2 25,7
42 26,8 26,3
43 27,5 27
44 28,1 27,6
45 28,8 28,3
46 29,4 28,9
47 30 29,5
48 30,7 30,2
49 31,4 30,9



Our sizing tips

Remember, if you miss the correct size, you can always return the purchased products to us and you have up to 101 days * to do so! Take advantage of the easy return via the website quick returns or send us the returned product on your own.

Important when choosing the size of clothing

How to measure yourself in the chest? Use a tailor's tape measure to measure the circumference of the fullest part of the chest. Take the measurement in underwear, a thin T-shirt, etc. - a thick sweatshirt may distort the result.

How to measure yourself at the waist? Forget about measuring with a tape measure, unfortunately it will not work. Take a tailor's tape measure and measure the circumference of your waist where you usually wear pants. Check whether the trousers you are viewing have waist adjustments or an elastic waist system and take this into account when measuring and selecting the sizes.

How to measure yourself in the hips? Some manufacturers give an additional value in the size charts - this is the circumference of the hips. Use a tailor's tape measure to measure the circumference at its widest point. Take the measurement in underwear - trousers, e.g. with holster pockets, may distort the result.

How to measure the length of the leg? Lay your pants flat and measure the distance from the crotch to the bottom of the leg with a tape measure or tape measure. Remember the result and compare it with the leg lengths shown in the table. This way you will decide whether to choose a standard, short or extended size.

Important when choosing the size of shoes

For work shoes where we spend most of the day, choosing the right size is especially important. Here are our tips:

Put on the sock that you will wear with your shoes (especially if you use thicker socks, e.g. hiking socks), then place your foot on an A4 sheet of paper placed on the floor and outline its shape. Compare the length of the section between the edge of the heel and the farthest toe with the manufacturer's size chart.

Note that the toecap in work shoes reduces the possibility of the shoe 'shattering'.

The time of measurement is also important - in the evening the rate is higher than in the morning, so we recommend measuring at the end of the working day.

INSTRUCTIONS FOR MEASURING THE FEET

If you have doubts about how to measure your foot, you can use our measurement formula, which you can find by clicking on the link above "foot measurement instructions". Most often, thanks to these steps, our clients manage to choose the perfect size.

Quantity

  Available for immediate dispatch

Free shipping available

Delivery time 2-3 business days

Up to 101 days for a free return

 

Payment secured by Stripe and Paypal

 

Secured by SSL and Cloudfare

 

100% Original products

Get Reward Points

Hey! buy this product and collect 8 Reward Points of worth €1.00

Model: RAFTING TOP

Upper: waterproof full grain leather

Lining: Textile lining

Sole: oil-resistant and heat-resistant anti-slip rubber

Toe cap: composite

Clasp type: lace-up

Protection class: S3

Color: brown 

Ordering no: B0610

Requirements: in accordance with EN ISO 20345: 2011, S3, SRC

 

 

BASE RAFTING TOP S3 safety boots - Italian style

BASE Rafting Top S3 safety boots are shoes with a modern design, which will definitely be eye-catching, reminiscent of classic leather boots. However, it is not the appearance of the safety boots that is most important, but their functionality. BASE Rafting Top S3 safety boots, apart from their refined appearance, meet the requirements of the S3 standard with the use of a composite toe cap and an anti-puncture insert. In combination with the anti-bacterial Smell Stop lining, a specially constructed sole that allows the air to circulate continuously in the shoe, which increases the comfort of wearing and the breathability of the skin, BASE Rafting Top S3 safety boots will be suitable both during work and on weekdays.

Product features:

  • made of waterproof grain leather,
  • composite toecap,
  • composite anti-puncture insert,
  • profiled, replaceable insert,
  • antistatic properties,
  • resistant to fuel and oil.

Product Details

8057741715078

Data sheet

Footwear protection class
S3
Toe cap
Composite
Material
Leather
Anti-puncture insert
Yes
Fitting system
Laces
Waterproof membrane
No
Standard
SRC

Returns FAQ:

1. Do you offer free returns?

Yes you can return product using free return label or send your parcel to our natonal warehouse in your country.

2. How can I exchange my product?

Well the best way is to just purchase the one you like and shipp back the item that you don't like. We do not "exchange" products.

3. How long I have to wait to be refunded?

Usually we need 3-4 days to refund your order. Please be sure you filled in and attached your return form. It will make a huge difference for processing your refund.

4. Do I need original invoice to return my order?

Sure you do not! As long as you have an order number, return form or any other identifier for your order we will find you and we will refund you!

Warranty FAQ:

  • What is the warranty for my order? 24 months.
  • When will I get an answer for my warranty claim? No longer than 14 days.
  • Do I need an invoice or receipt to file a claim? No.
  • Do I need to send product to Baltic Workwear? No. Most of claims we do via our electronic system. All you need to do is provide us good quality pictures of product. 
  • Do I pay for warranty procedure? No. It is free.
  • Do I need an original box? No.