Bosafety Pilot 4in1 men's insulated jacket
Bosafety Pilot 4in1 men's insulated jacket product features:
- Outer material: 50% polyester / 50% cotton, weight 245 g/m²
- Protective layer: TEX-Protector - oil and dirt repellent
- Protective layer against light rain - the jacket is not waterproof,
- Insulation: detachable fur (100% polyester, 55 g/m²)
- Sleeves: 100% polyester insulated, 120 g/m² - detachable
- Pilot 4in1: jacket, vest, jacket with Fur, Jacket Without Fur
- Purpose: Ideal for work in changing weather conditions and for everyday use.
FAQ – Frequently Asked Questions
What makes the Bosafety Pilot 4-in-1 jacket stand out?
It's a versatile model that can be worn as a classic jacket, a vest, a jacket with fur lining, or without fur.
Is the Bosafety Pilot jacket rain and dirt resistant?
Yes, the TEX-Protector coating makes the material less susceptible to dirt. The jacket is not waterproof.
Is the lining in the Pilot 4-in-1 jacket removable?
Yes, the fur lining is fully removable, allowing you to adapt the jacket to the weather.
Questions
Be the first to ask a question about this product!
Question about the product
Details
Comments
Manufacturer: Bosafety

EU responsible person:
UAB „Saugima”
Smėlynės g. 112
Panevėžys LT-35113
eshop@saugima.com
Download - General safety instructions for upper clothing
Safety warnings:
- The product is not intended for children – protective and work clothing is designed exclusively for adults, in sizes and construction tailored to the needs of employees.
- Packaging suffocation or choking hazard – foil or plastic packaging should be stored and disposed of out of reach of children.
- No protection against hazards other than those specified in the product documentation – clothing does not provide protection against fire, chemicals, electricity or radiation unless it is designed and certified for this purpose.
- Reflective clothing:
- Reflective elements lose their effectiveness when they become dirty, wet, discolored or mechanically worn.
- Use in conditions of limited visibility requires adequate lighting and a contrasting background.
- Reflective elements must not be covered with other clothing or accessories.
- Clothing to protect against cold:
- Provides protection only within the range specified in the EN 342 or EN 14058 standards – it does not guarantee safety at extremely low temperatures, below the manufacturer's parameters.
- Layer your clothing as recommended to avoid the risk of hypothermia.
- Getting winter clothing wet can significantly reduce its insulating properties.
- Rainwear:
- Maintaining waterproofness depends on the correct fastening of all elements (zippers, Velcro, buttons, protective strips).
- Mechanical damage, prolonged use or washing at high temperatures may reduce the level of water resistance.
- Intense physical activity can cause moisture to accumulate inside clothing, requiring the use of breathable clothing or intermediate layers.
- Thermal underwear:
- Does not provide protection against direct contact with chemical, thermal or mechanical factors.
- The effectiveness of moisture wicking depends on the proper fit to the body.
- Excessive stretching or damage to the material may reduce its performance properties.
- Maintenance and cleaning:
- Failure to follow washing, drying or storage instructions may result in loss of protective properties.
- The use of chemicals not recommended by the manufacturer (e.g. bleach, solvents) may permanently damage fabrics and protective elements.
- Clothing exchange:
- Clothing that is worn, frayed, mechanically damaged or has visibly deteriorated reflective elements should be replaced immediately.
- Regularly checking the condition of clothing is crucial to maintaining the user's safety.
Products in the same category
Portwest
Portwest PJ20 4 in 1 bomber winter jacket
Bosafety
Bosafety Oxford New Riga men's insulated jacket
Dassy
Dassy Nordix winter work jacket
Dassy
Dassy Minsk insulated winter jacket
Bosafety
Winter jacket Atlanta WJ-0200
Customers who bought this product also bought: