SIR Microlines Softshell Antistatic Work Jacket
SIR Microlines Softshell Antistatic Work Jacket product features :
- Outer material and lining - Made of 100% polyester twill fabric with a 400 g/m² microfleece interior for thermal protection and comfort.
- Windproof closure - Jacket has a zipper with a storm flap, which limits the entry of wind and moisture through the closure.
- Zippered pockets
- Adjustable cuffs - The cuffs are equipped with Velcro straps that allow you to adjust the sleeve to your wrist for better protection against cold and dust.
- Adjustable bottom hem - Jacket has a drawstring at the bottom hem, which allows you to limit the access of cold air and improve the fit.
- Visibility enhancing elements - Double reflective tapes at the sleeve ends and tapes at the waist and vertically on the shoulders improve the user's visibility in low light conditions.
- Compliance with personal protective equipment regulations - The product has been designed and manufactured in accordance with Regulation (EU) 2016/425, which confirms compliance with PPE requirements.
- Safety certificates and standards - Jacket meets many technical standards relevant to the work environment: EN ISO 11611 Class:2 (A1+A2), EN ISO 11612 (A1+A2, B1, C2, D2, E3, F1), EN 1149-5, EN ISO 20471 Class:2, EN 13034 Type :PB6 and EN 61482-2 APC:2.
- Industry purpose - The product is recommended for use in construction and road works, the chemical-pharmaceutical and petrochemical industries, logistics, as well as in trade and services.
FAQ - SIR Microlines Softshell Antistatic Work Jacket
What is jacket made of?
Jacket is made of 100% polyester twill fabric, with a 400 g/m² microfleece interior.
What safety standards does the product meet?
Jacket meets, m.in. standards EN ISO 11611 Class:2 (A1+A2), EN ISO 11612 (A1+A2, B1, C2, D2, E3, F1), EN 1149-5, EN ISO 20471 Class:2, EN 13034 Type :PB6 and EN 61482-2 APC:2.
In what industry conditions can it be used?
The product is recommended for use in construction and road works, the chemical-pharmaceutical and petrochemical industries, logistics, and the service and trade sectors.
Questions
Be the first to ask a question about this product!
Question about the product
Details
Certified hi-vis clothing
Flame retardant
Insulated
Windproof
Zipper pockets
Adjustable hem
EN 11611 - Protection during welding and allied processes
EN 11612 - Clothing for protection against heat and flame
EN 13034 - Chemical protective clothing
EN 20471 class 2 - High visibility clothing
EN 61482 - Protective clothing against the thermal hazards of an electric arc
Comments
Manufacturer: Sir Safety

EU responsible person:
Sir Safety System S.p.A.
Via dei Fornaciai 9
Assisi 06081
sir@sirsafety.com
Download - General safety instructions for upper clothing
Safety warnings:
- The product is not intended for children – protective and work clothing is designed exclusively for adults, in sizes and construction tailored to the needs of employees.
- Packaging suffocation or choking hazard – foil or plastic packaging should be stored and disposed of out of reach of children.
- No protection against hazards other than those specified in the product documentation – clothing does not provide protection against fire, chemicals, electricity or radiation unless it is designed and certified for this purpose.
- Reflective clothing:
- Reflective elements lose their effectiveness when they become dirty, wet, discolored or mechanically worn.
- Use in conditions of limited visibility requires adequate lighting and a contrasting background.
- Reflective elements must not be covered with other clothing or accessories.
- Clothing to protect against cold:
- Provides protection only within the range specified in the EN 342 or EN 14058 standards – it does not guarantee safety at extremely low temperatures, below the manufacturer's parameters.
- Layer your clothing as recommended to avoid the risk of hypothermia.
- Getting winter clothing wet can significantly reduce its insulating properties.
- Rainwear:
- Maintaining waterproofness depends on the correct fastening of all elements (zippers, Velcro, buttons, protective strips).
- Mechanical damage, prolonged use or washing at high temperatures may reduce the level of water resistance.
- Intense physical activity can cause moisture to accumulate inside clothing, requiring the use of breathable clothing or intermediate layers.
- Thermal underwear:
- Does not provide protection against direct contact with chemical, thermal or mechanical factors.
- The effectiveness of moisture wicking depends on the proper fit to the body.
- Excessive stretching or damage to the material may reduce its performance properties.
- Maintenance and cleaning:
- Failure to follow washing, drying or storage instructions may result in loss of protective properties.
- The use of chemicals not recommended by the manufacturer (e.g. bleach, solvents) may permanently damage fabrics and protective elements.
- Clothing exchange:
- Clothing that is worn, frayed, mechanically damaged or has visibly deteriorated reflective elements should be replaced immediately.
- Regularly checking the condition of clothing is crucial to maintaining the user's safety.
Products in the same category
Snickers Workwear
AllroundWork Snickers 1330 OUT hi-vis Work Jacket
Bosafety
Bosafety Galaxy C1 men's reflective jacket
Snickers Workwear
Snickers 1132 37.5 hooded winter jacket
Snickers Workwear
Snickers 1133 Reflective Work Jacket
Dassy
Women's softshell HiVis jacket Kalama Women 280 gm Dassy 300547
Viewed products