• Półbuty robocze Solid Gear Prime GTX low S3
  • Półbuty robocze Solid Gear Prime GTX low S3
  • Półbuty robocze Solid Gear Prime GTX low S3
  • Półbuty robocze Solid Gear Prime GTX low S3
  • Półbuty robocze Solid Gear Prime GTX low S3
Solid Gear

Solid Gear Prime GTX low S3 safety shoes

€349.99
Tax included

The lowest price of the product €349.99 in day 12.04.2024

Lowest price in the last 30 days

Color
  • Black
Size
37
36 Shipping in 48H
37 Shipping in 48H
38 Shipping in 48H
39 Shipping in 48H
40 Shipping in 48H
41
Sold out
42
Sold out
43
Sold out
44
Sold out
45 Shipping in 48H
46 Shipping in 48H
47 Shipping in 48H
48
Sold out
Size Guide

Don't know how to pick up the right size? Check our size table!



SIZESOLE LENGTH [CM]MAX. FOOT LENGTH [CM]
36 24 23,5
37 24,6 24,1
38 25,3 24,8
39 26 25,5
40 26,6 26,1
41 27,3 26,8
42 28 27,5
43 28,6 28,1
44 29,3 28,8
45 30 29,5
46 30,6 30,1
47 31,3 30,8
48 32 31,5



Our sizing tips

Remember, if you miss the correct size, you can always return the purchased products to us and you have up to 101 days * to do so! Take advantage of the easy return via the website quick returns or send us the returned product on your own.

Important when choosing the size of clothing

How to measure yourself in the chest? Use a tailor's tape measure to measure the circumference of the fullest part of the chest. Take the measurement in underwear, a thin T-shirt, etc. - a thick sweatshirt may distort the result.

How to measure yourself at the waist? Forget about measuring with a tape measure, unfortunately it will not work. Take a tailor's tape measure and measure the circumference of your waist where you usually wear pants. Check whether the trousers you are viewing have waist adjustments or an elastic waist system and take this into account when measuring and selecting the sizes.

How to measure yourself in the hips? Some manufacturers give an additional value in the size charts - this is the circumference of the hips. Use a tailor's tape measure to measure the circumference at its widest point. Take the measurement in underwear - trousers, e.g. with holster pockets, may distort the result.

How to measure the length of the leg? Lay your pants flat and measure the distance from the crotch to the bottom of the leg with a tape measure or tape measure. Remember the result and compare it with the leg lengths shown in the table. This way you will decide whether to choose a standard, short or extended size.

Important when choosing the size of shoes

For work shoes where we spend most of the day, choosing the right size is especially important. Here are our tips:

Put on the sock that you will wear with your shoes (especially if you use thicker socks, e.g. hiking socks), then place your foot on an A4 sheet of paper placed on the floor and outline its shape. Compare the length of the section between the edge of the heel and the farthest toe with the manufacturer's size chart.

Note that the toecap in work shoes reduces the possibility of the shoe 'shattering'.

The time of measurement is also important - in the evening the rate is higher than in the morning, so we recommend measuring at the end of the working day.

INSTRUCTIONS FOR MEASURING THE FEET

If you have doubts about how to measure your foot, you can use our measurement formula, which you can find by clicking on the link above "foot measurement instructions". Most often, thanks to these steps, our clients manage to choose the perfect size.

Size Guide

Don't know how to pick up the right size? Check our size table!



SIZESOLE LENGTH [CM]MAX. FOOT LENGTH [CM]
36 24 23,5
37 24,6 24,1
38 25,3 24,8
39 26 25,5
40 26,6 26,1
41 27,3 26,8
42 28 27,5
43 28,6 28,1
44 29,3 28,8
45 30 29,5
46 30,6 30,1
47 31,3 30,8
48 32 31,5



Our sizing tips

Remember, if you miss the correct size, you can always return the purchased products to us and you have up to 101 days * to do so! Take advantage of the easy return via the website quick returns or send us the returned product on your own.

Important when choosing the size of clothing

How to measure yourself in the chest? Use a tailor's tape measure to measure the circumference of the fullest part of the chest. Take the measurement in underwear, a thin T-shirt, etc. - a thick sweatshirt may distort the result.

How to measure yourself at the waist? Forget about measuring with a tape measure, unfortunately it will not work. Take a tailor's tape measure and measure the circumference of your waist where you usually wear pants. Check whether the trousers you are viewing have waist adjustments or an elastic waist system and take this into account when measuring and selecting the sizes.

How to measure yourself in the hips? Some manufacturers give an additional value in the size charts - this is the circumference of the hips. Use a tailor's tape measure to measure the circumference at its widest point. Take the measurement in underwear - trousers, e.g. with holster pockets, may distort the result.

How to measure the length of the leg? Lay your pants flat and measure the distance from the crotch to the bottom of the leg with a tape measure or tape measure. Remember the result and compare it with the leg lengths shown in the table. This way you will decide whether to choose a standard, short or extended size.

Important when choosing the size of shoes

For work shoes where we spend most of the day, choosing the right size is especially important. Here are our tips:

Put on the sock that you will wear with your shoes (especially if you use thicker socks, e.g. hiking socks), then place your foot on an A4 sheet of paper placed on the floor and outline its shape. Compare the length of the section between the edge of the heel and the farthest toe with the manufacturer's size chart.

Note that the toecap in work shoes reduces the possibility of the shoe 'shattering'.

The time of measurement is also important - in the evening the rate is higher than in the morning, so we recommend measuring at the end of the working day.

INSTRUCTIONS FOR MEASURING THE FEET

If you have doubts about how to measure your foot, you can use our measurement formula, which you can find by clicking on the link above "foot measurement instructions". Most often, thanks to these steps, our clients manage to choose the perfect size.

Quantity

  Shipping in 48H

Free shipping available

Delivery time 2-3 business days

Up to 101 days for a free return

No queries yet, leave the first!
 

Shipping in 24H - on stock items

Get Reward Points

Hey! buy this product and collect 35 Reward Points of worth €3.50

High-quality safety shoes with the Vibram® sole known from mountain and trekking footwear, the modern BOA® Fit fastening and the waterproof GORE-TEX® membrane will provide you with comfort and safety throughout the working day.

Product features:

  • protection class S3,
  • microfiber upper,
  • breathable and water-resistant GORE-TEX® membrane,
  • fiberglass toe cap and anti-puncture insert,
  • fitted, ergonomic tongue with GORE-TEX® Stretch technology,
  • non-slip, shock-absorbing and durable Vibram sole known from mountain shoes,
  • springy, shock-absorbing and extremely flexible ETPU midsole,
  • meet the requirements of EN ISO 20345:2011 S3, SRC, WR,
  • manufacturer code: SG80011.

The Solid Gear Prime GTX low S3 men's shoes guarantee comfort, safety and stability. They are made of durable microfiber with a GORE-TEX® membrane. They provide excellent breathability and waterproofness. The safety shoes have been reinforced with TPU for greater durability. Known from mountain and trekking shoes, the Vibram® outsole guarantees excellent stability and cushioning, as well as slip resistance. Additional comfort is provided by the flexible and cushioning ETPU midsole. The ergonomically adjusted tongue with GORE-TEX® Stretch technology in the upper, together with the high heel counter and the modern BOA® Fit lacing system, make the safety shoes extremely fit to the foot. For protection, the safety shoes are equipped with a lightweight fiberglass toe cap and a puncture-resistant insert.

Product Details

Solid Gear
7340093629515

Data sheet

Toe cap
Composite
Anti-puncture insert
Yes
Fitting system
BOA
Waterproof membrane
Yes
BOA type
L6
Standard
HRO
SRC

Returns FAQ:

1. Do you offer free returns?

Yes you can return product using free return label or send your parcel to our natonal warehouse in your country.

2. How can I exchange my product?

Well the best way is to just purchase the one you like and shipp back the item that you don't like. We do not "exchange" products.

3. How long I have to wait to be refunded?

Usually we need 3-4 days to refund your order. Please be sure you filled in and attached your return form. It will make a huge difference for processing your refund.

4. Do I need original invoice to return my order?

Sure you do not! As long as you have an order number, return form or any other identifier for your order we will find you and we will refund you!

Warranty FAQ:

  • What is the warranty for my order? 24 months.
  • When will I get an answer for my warranty claim? No longer than 14 days.
  • Do I need an invoice or receipt to file a claim? No.
  • Do I need to send product to Baltic Workwear? No. Most of claims we do via our electronic system. All you need to do is provide us good quality pictures of product. 
  • Do I pay for warranty procedure? No. It is free.
  • Do I need an original box? No.

Other products in the same category...

Check our other products recomended for you...

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

Product Comments

Comments (0)