Toughbuilt Tool Bags, Accessories & Knee Pads - where to start?

An American brand of accessories that needs no introduction! Toughbuilt - because that's what we are talking about in today's article - won the hearts of professionals with its uncompromising quality of workmanship and innovative solutions. The offer of this manufacturer includes sturdy tool belts, tool bags, electrician pockets and many other products that will make your daily duties easier. If you don't know where to start your adventure with these best-selling work accessories yet, check out a few of our recommendations!

Toughbuilt knee pads - is it worth it?

Are you wondering which Toughbuilt work knee pads to choose? In addition to the already iconic models, such as the GelFit Fanatic model, it is worth paying attention to the extremely versatile Toughbuilt GelFit Non-Marring TB-KP-G203 knee pads. Equipped with a gel and foam insert, designed so that you can attach silicone or plastic overlays. The modular system of these knee pads allows you to adjust them to your individual needs, and also saves money - you can get both types of pads, and you only need one knee pad to use them. How are these Toughbuilt work knee pads built? This model consists of external knee pads - put on trousers, so much more practical. They are attached to one wide, neoprene strap fastened with a strong Velcro, approx. 4.5 cm wide, with a loop for easy removal. A wide belt is a good solution - there are no elastic bands that press under the knee and cause discomfort. The front of the knee pads is made of Cordura, decorated with the manufacturer's logo, while the knee pads are finished with a solid trim. This model is quite large, it covers the knee well, ensuring comfortable work. Inside, a GelFit gel insert is used. These knee pads can be used alone, without additional overlays, especially when working on clean surfaces. When working on dirty, but also delicate surfaces, it is worth using silicone overlays. This accessory for Toughbuilt knee pads is made of silicone with a thickness of about 3 mm, and it is attached with solid press studs. The overlays are easy to clean, they do not leave any traces on the surfaces. Both sides are decorated with the brand's logo. If you need additional support while working, the Toughbuilt Overlays Stabilizer Snapshell KPS-05 will help you. The cosmic look of the overlays, contrasting colors and solid material are eye-catching. In the front part, the stabilizing overlays are made of rubber decorated with the brand logo. The overlays can be easily attached to the knee pads thanks to the press studs. This addition provides exceptional stability, the pad measuring approx. 15 cm wide by approx. 23 cm long also partially supports the tibia, giving unparalleled comfort in working in a kneeling position. If you value modern solutions and professional accessories for work, try this system of work knee pads!

Where to buy Toughbuilt Tool Bags?

Polish shop with Toughbuilt tool bags? The choice is simple, check our offer! We have selected the best, most functional models - from small pockets for single tools, to bags for electricians and everyone who needs half of their workshop at hand. ;) Tool bags with the ClipTech fastening system are particularly popular. These are small handles that allow you to attach your tool bag not only to your Tougbuilt tool belt, but also to any part of your clothing or other items that come to your mind. If you don't like taking your entire toolbox to work and are looking for a more practical solution, check out the Toughbuilt tool pocket models. You can start with simple models, such as the Toughbuilt TB-CT-20-S holster pocket for a screwdriver. It is a small and very light piece of equipment, available with a ClipTech handle. The front part has a screwdriver attachment and a strap to secure the tool. A special cutout for the trigger of the tool protects against accidental activation. The pocket is designed primarily for small 10V-12V screwdrivers. It will also accommodate larger tools, however, they must be properly secured against accidental activation in advance. This model is perfect for screwdrivers that are not equipped with a handle for transporting them. The Toughbuilt tool pocket will also accommodate a few bits and other small items - in addition to the main compartment for the screwdriver, the manufacturer took care of smaller compartments and pockets. Another little thing that can make your daily work easier is the Toughbuilt hammer holder TB-52. Made of ABS plastic, with a steel hammer loop, reinforced with steel rivets. In addition, it is equipped with a Velcro strap, which will serve, for example, as a cable holder for a power screwdriver. This model is attached to a sturdy handle, suitable for tool belts approx. 5 cm wide and 3-4 mm thick. In addition, you can also attach it to any tool pocket, string, regular belt, trouser pocket, whatever you want! The TB-52 handle is distinguished by its large size, which is why it is extremely comfortable to use. You can use it as intended, or as a holder for a screwdriver with a hanger, larger tongs or a cord.

Which electrician's bag should I choose?

Toughbuilt electrician's bags are mounted on ClipTech handles and are available in various sizes, so everyone can choose the product perfectly suited to their needs. These pockets can be attached to any tool belt, wall, toolbox - where it will be most convenient for you. In addition, the models are equipped with a strap that allows you to carry the bag over your shoulder. For greater functionality, the products have Velcro-opened supports with a strap that acts as a limiter. The Balticbhp.pl offer includes a large Toughbuilt TB-CT-114 electrician's bag and its smaller version. Both products include Velcro-fastened pockets, as well as a custom-made pocket, loops for securing tools and other useful ideas. The large electrician's pocket has a double pocket for tongs, while the small one has a single pocket. Closed at the bottom with a Velcro strap, also suitable for long tools. A useful accessory is the strap holder in the form of a chain with bent wire to secure the strap. The main tool pocket, divided into 3 compartments, plays a key role in the TB-CT-144 bag. The Toughbuilt tool bag small electrician pouch TB-CT-34 has one tool compartment. The large model of the Toughbuilt tool pocket has as many as 7 pockets for screwdrivers and other accessories, while the small model has 2 pockets. An additional gadget is a compartment for a notebook and a pencil, and in the case of a large pocket - a loop for a flashlight or a hammer, adjustable in the circumference. It is a great idea for extending a tool bag, replacing the tool box with functional accessories that will make your work more comfortable.

Toughbuilt Tool Pockets - What are the Customer Reviews?

Fans of professional workwear and accessories can't be wrong! Toughbuilt is a revolution in the world of work, accessories tailored to the needs of real professionals. The brand listens to the needs of craftsmen, and improves its products to meet the expectations of the most demanding users. Multilayer structures of tool bags and pockets, solid rivets for reinforcement, and above all, the possibility of any configuration of the products determined the international success of the brand. Toughbuilt is an investment in work comfort, saving time every day - something that professionals will appreciate. An unquestionable advantage of the brand's products is also the ClipTech fastening system. These are small but solid handles that can be attached to a belt or a flat bar. They have holes through which they can be screwed and prepare the entire workshop wall in a modular version. The brand's offer also includes a mounting strip dedicated to ClipTech handles. Thanks to this, you can easily take the bag with the necessary tools and immediately attach it to your tool belt. For lovers of organization and order, such a solution can work much better than ordinary tool boxes, in which we often have difficult access to tools and accessories. Most often, of course, to those that are needed the most. Take care of your comfort of work, save time searching for tools, have at hand only what you really need at work, instead of lugging a tool box. The Toughbuilt offer at Balticbhp.pl is a way to better organize your working day. Do you want to know more, get to know the opinions of users? See comments under the products on our website and also join our Toughbuilt fan group on Facebook!