Półbuty robocze Solid Gear Revolution 2.0 GTX S3
Solid Gear

Solid Gear Revolution 2.0 GTX S3 safety shoes

€289.99
Tax included

The lowest price of the product €289.99 in day 27.03.2024

Lowest price in the last 30 days

Color
  • Navy
Size
36
36 Shipping in 48H
37 Shipping in 48H
38 Shipping in 48H
39 Shipping in 48H
40 Shipping in 48H
41 Shipping in 48H
42 Shipping in 48H
43 Shipping in 48H
44 Shipping in 48H
45 Shipping in 48H
46 Shipping in 48H
47 Shipping in 48H
48 Shipping in 48H
Size Guide

Don't know how to pick up the right size? Check our size table!



SIZESOLE LENGTH [CM]MAX. FOOT LENGTH [CM]
36 24 23,5
37 24,6 24,1
38 25,3 24,8
39 26 25,5
40 26,6 26,1
41 27,3 26,8
42 28 27,5
43 28,6 28,1
44 29,3 28,8
45 30 29,5
46 30,6 30,1
47 31,3 30,8
48 32 31,5



Our sizing tips

Remember, if you miss the correct size, you can always return the purchased products to us and you have up to 101 days * to do so! Take advantage of the easy return via the website quick returns or send us the returned product on your own.

Important when choosing the size of clothing

How to measure yourself in the chest? Use a tailor's tape measure to measure the circumference of the fullest part of the chest. Take the measurement in underwear, a thin T-shirt, etc. - a thick sweatshirt may distort the result.

How to measure yourself at the waist? Forget about measuring with a tape measure, unfortunately it will not work. Take a tailor's tape measure and measure the circumference of your waist where you usually wear pants. Check whether the trousers you are viewing have waist adjustments or an elastic waist system and take this into account when measuring and selecting the sizes.

How to measure yourself in the hips? Some manufacturers give an additional value in the size charts - this is the circumference of the hips. Use a tailor's tape measure to measure the circumference at its widest point. Take the measurement in underwear - trousers, e.g. with holster pockets, may distort the result.

How to measure the length of the leg? Lay your pants flat and measure the distance from the crotch to the bottom of the leg with a tape measure or tape measure. Remember the result and compare it with the leg lengths shown in the table. This way you will decide whether to choose a standard, short or extended size.

Important when choosing the size of shoes

For work shoes where we spend most of the day, choosing the right size is especially important. Here are our tips:

Put on the sock that you will wear with your shoes (especially if you use thicker socks, e.g. hiking socks), then place your foot on an A4 sheet of paper placed on the floor and outline its shape. Compare the length of the section between the edge of the heel and the farthest toe with the manufacturer's size chart.

Note that the toecap in work shoes reduces the possibility of the shoe 'shattering'.

The time of measurement is also important - in the evening the rate is higher than in the morning, so we recommend measuring at the end of the working day.

INSTRUCTIONS FOR MEASURING THE FEET

If you have doubts about how to measure your foot, you can use our measurement formula, which you can find by clicking on the link above "foot measurement instructions". Most often, thanks to these steps, our clients manage to choose the perfect size.

Size Guide

Don't know how to pick up the right size? Check our size table!



SIZESOLE LENGTH [CM]MAX. FOOT LENGTH [CM]
36 24 23,5
37 24,6 24,1
38 25,3 24,8
39 26 25,5
40 26,6 26,1
41 27,3 26,8
42 28 27,5
43 28,6 28,1
44 29,3 28,8
45 30 29,5
46 30,6 30,1
47 31,3 30,8
48 32 31,5



Our sizing tips

Remember, if you miss the correct size, you can always return the purchased products to us and you have up to 101 days * to do so! Take advantage of the easy return via the website quick returns or send us the returned product on your own.

Important when choosing the size of clothing

How to measure yourself in the chest? Use a tailor's tape measure to measure the circumference of the fullest part of the chest. Take the measurement in underwear, a thin T-shirt, etc. - a thick sweatshirt may distort the result.

How to measure yourself at the waist? Forget about measuring with a tape measure, unfortunately it will not work. Take a tailor's tape measure and measure the circumference of your waist where you usually wear pants. Check whether the trousers you are viewing have waist adjustments or an elastic waist system and take this into account when measuring and selecting the sizes.

How to measure yourself in the hips? Some manufacturers give an additional value in the size charts - this is the circumference of the hips. Use a tailor's tape measure to measure the circumference at its widest point. Take the measurement in underwear - trousers, e.g. with holster pockets, may distort the result.

How to measure the length of the leg? Lay your pants flat and measure the distance from the crotch to the bottom of the leg with a tape measure or tape measure. Remember the result and compare it with the leg lengths shown in the table. This way you will decide whether to choose a standard, short or extended size.

Important when choosing the size of shoes

For work shoes where we spend most of the day, choosing the right size is especially important. Here are our tips:

Put on the sock that you will wear with your shoes (especially if you use thicker socks, e.g. hiking socks), then place your foot on an A4 sheet of paper placed on the floor and outline its shape. Compare the length of the section between the edge of the heel and the farthest toe with the manufacturer's size chart.

Note that the toecap in work shoes reduces the possibility of the shoe 'shattering'.

The time of measurement is also important - in the evening the rate is higher than in the morning, so we recommend measuring at the end of the working day.

INSTRUCTIONS FOR MEASURING THE FEET

If you have doubts about how to measure your foot, you can use our measurement formula, which you can find by clicking on the link above "foot measurement instructions". Most often, thanks to these steps, our clients manage to choose the perfect size.

Quantity

  Shipping in 48H

Free shipping available

Delivery time 2-3 business days

Up to 101 days for a free return

 

Payment secured by Stripe and Paypal

 

Secured by SSL and Cloudfare

 

100% Original products

Get Reward Points

Hey! buy this product and collect 29 Reward Points of worth €3.00

Modern men's shoes designed for work that will catch the eye of others. Made using ETPU and GORE-TEX® technology. Slip, oil, water, puncture and crush resistant.

Product features:

  • protection class S3,
  • Cordura® upper with TPU reinforcements,
  • breathable and waterproof GORE-TEX® membrane,
  • breathable and cushioning OrthoLite® insole,
  • light and durable synthetic Nano toe cap,
  • puncture-resistant metal insert,
  • non-slip and oil-resistant sole,
  • two types of laces: Speed and classic,
  • stabilizer heel made of ocean debris, such as fishing nets
  • meet the requirements of EN ISO 20345:2011 S3, SRC, HRO, WR,
  • manufacturer code: SG76010.



Solid Gear Revolution 2.0 GTX safety shoes with S3 protection class were made using modern ETPU and GORE-TEX® technologies. They guarantee excellent comfort and cushioning. The lightweight upper made of Cordura® with TPU reinforcements together with the GORE-TEX® membrane provides excellent ventilation, fit and keeps the foot dry. Men's shoes are equipped with a specially developed OrthoLite® insole made mainly of recycled materials, which provides a high depreciation factor. Additional stability is provided by a heel counter made of collected ocean waste. To ensure protection, the safety shoes are equipped with a modern and lightweight Nano toe cap, which is 40% stronger, as well as much lighter and thinner than other materials used in the production of non-metallic toe caps. Puncture protection is provided by a metal-free anti-puncture insert. The non-slip sole is oil resistant. The shoes come with two types of laces: Speed and classic in orange and navy blue.

Product Details

Solid Gear
7340093628723

Data sheet

Footwear protection class
S3
Toe cap
Composite
Anti-puncture insert
Yes
Fitting system
Laces
Waterproof membrane
Yes
Standard
HRO
SRC

Returns FAQ:

1. Do you offer free returns?

Yes you can return product using free return label or send your parcel to our natonal warehouse in your country.

2. How can I exchange my product?

Well the best way is to just purchase the one you like and shipp back the item that you don't like. We do not "exchange" products.

3. How long I have to wait to be refunded?

Usually we need 3-4 days to refund your order. Please be sure you filled in and attached your return form. It will make a huge difference for processing your refund.

4. Do I need original invoice to return my order?

Sure you do not! As long as you have an order number, return form or any other identifier for your order we will find you and we will refund you!

Warranty FAQ:

  • What is the warranty for my order? 24 months.
  • When will I get an answer for my warranty claim? No longer than 14 days.
  • Do I need an invoice or receipt to file a claim? No.
  • Do I need to send product to Baltic Workwear? No. Most of claims we do via our electronic system. All you need to do is provide us good quality pictures of product. 
  • Do I pay for warranty procedure? No. It is free.
  • Do I need an original box? No.