Work shoes Solid Gear Atlas S3 SRC
  • Work shoes Solid Gear Atlas S3 SRC
  • Work shoes Solid Gear Atlas S3 SRC
  • Work shoes Solid Gear Atlas S3 SRC
  • Work shoes Solid Gear Atlas S3 SRC
  • Work shoes Solid Gear Atlas S3 SRC
Solid Gear

Solid Gear Atlas S3 SRC safety shoes

(2)
Write your review
€149.99
€174.99
-15%
Tax included

The lowest price of the product €149.99 in day 27.04.2024

Lowest price in the last 30 days

Size
42
40
41
42
43
44
45
Sold out
46 Wysyłka 48H
Size Guide

Don't know how to pick up the right size? Check our size table!



SIZESOLE LENGTH [CM]MAX. FOOT LENGTH [CM]
36 24 23,5
37 24,6 24,1
38 25,3 24,8
39 26 25,5
40 26,6 26,1
41 27,3 26,8
42 28 27,5
43 28,6 28,1
44 29,3 28,8
45 30 29,5
46 30,6 30,1
47 31,3 30,8
48 32 31,5



Our sizing tips

Remember, if you miss the correct size, you can always return the purchased products to us and you have up to 101 days * to do so! Take advantage of the easy return via the website quick returns or send us the returned product on your own.

Important when choosing the size of clothing

How to measure yourself in the chest? Use a tailor's tape measure to measure the circumference of the fullest part of the chest. Take the measurement in underwear, a thin T-shirt, etc. - a thick sweatshirt may distort the result.

How to measure yourself at the waist? Forget about measuring with a tape measure, unfortunately it will not work. Take a tailor's tape measure and measure the circumference of your waist where you usually wear pants. Check whether the trousers you are viewing have waist adjustments or an elastic waist system and take this into account when measuring and selecting the sizes.

How to measure yourself in the hips? Some manufacturers give an additional value in the size charts - this is the circumference of the hips. Use a tailor's tape measure to measure the circumference at its widest point. Take the measurement in underwear - trousers, e.g. with holster pockets, may distort the result.

How to measure the length of the leg? Lay your pants flat and measure the distance from the crotch to the bottom of the leg with a tape measure or tape measure. Remember the result and compare it with the leg lengths shown in the table. This way you will decide whether to choose a standard, short or extended size.

Important when choosing the size of shoes

For work shoes where we spend most of the day, choosing the right size is especially important. Here are our tips:

Put on the sock that you will wear with your shoes (especially if you use thicker socks, e.g. hiking socks), then place your foot on an A4 sheet of paper placed on the floor and outline its shape. Compare the length of the section between the edge of the heel and the farthest toe with the manufacturer's size chart.

Note that the toecap in work shoes reduces the possibility of the shoe 'shattering'.

The time of measurement is also important - in the evening the rate is higher than in the morning, so we recommend measuring at the end of the working day.

INSTRUCTIONS FOR MEASURING THE FEET

If you have doubts about how to measure your foot, you can use our measurement formula, which you can find by clicking on the link above "foot measurement instructions". Most often, thanks to these steps, our clients manage to choose the perfect size.

Size Guide

Don't know how to pick up the right size? Check our size table!



SIZESOLE LENGTH [CM]MAX. FOOT LENGTH [CM]
36 24 23,5
37 24,6 24,1
38 25,3 24,8
39 26 25,5
40 26,6 26,1
41 27,3 26,8
42 28 27,5
43 28,6 28,1
44 29,3 28,8
45 30 29,5
46 30,6 30,1
47 31,3 30,8
48 32 31,5



Our sizing tips

Remember, if you miss the correct size, you can always return the purchased products to us and you have up to 101 days * to do so! Take advantage of the easy return via the website quick returns or send us the returned product on your own.

Important when choosing the size of clothing

How to measure yourself in the chest? Use a tailor's tape measure to measure the circumference of the fullest part of the chest. Take the measurement in underwear, a thin T-shirt, etc. - a thick sweatshirt may distort the result.

How to measure yourself at the waist? Forget about measuring with a tape measure, unfortunately it will not work. Take a tailor's tape measure and measure the circumference of your waist where you usually wear pants. Check whether the trousers you are viewing have waist adjustments or an elastic waist system and take this into account when measuring and selecting the sizes.

How to measure yourself in the hips? Some manufacturers give an additional value in the size charts - this is the circumference of the hips. Use a tailor's tape measure to measure the circumference at its widest point. Take the measurement in underwear - trousers, e.g. with holster pockets, may distort the result.

How to measure the length of the leg? Lay your pants flat and measure the distance from the crotch to the bottom of the leg with a tape measure or tape measure. Remember the result and compare it with the leg lengths shown in the table. This way you will decide whether to choose a standard, short or extended size.

Important when choosing the size of shoes

For work shoes where we spend most of the day, choosing the right size is especially important. Here are our tips:

Put on the sock that you will wear with your shoes (especially if you use thicker socks, e.g. hiking socks), then place your foot on an A4 sheet of paper placed on the floor and outline its shape. Compare the length of the section between the edge of the heel and the farthest toe with the manufacturer's size chart.

Note that the toecap in work shoes reduces the possibility of the shoe 'shattering'.

The time of measurement is also important - in the evening the rate is higher than in the morning, so we recommend measuring at the end of the working day.

INSTRUCTIONS FOR MEASURING THE FEET

If you have doubts about how to measure your foot, you can use our measurement formula, which you can find by clicking on the link above "foot measurement instructions". Most often, thanks to these steps, our clients manage to choose the perfect size.

Quantity

  On stock shipping in 24H

Free shipping available

Delivery time 2-3 business days

Up to 101 days for a free return

No queries yet, leave the first!
 

Shipping in 24H - on stock items

Get Reward Points

Hey! buy this product and collect 15 Reward Points of worth €1.50

Atlas work shoes from the well-known manufacturer Solid Gear are a combination of solid workmanship, high-quality materials, lightness and comfort. Atlas is a model characterized by a solid construction made of durable full-grain leather and low weight thanks to the use of light composite materials. It will perform well in demanding conditions, while ensuring safety and comfort.

Solid Gear Atlas S3 SRC safety shoes product features:

  • made of high-quality premium TECH leather,
  • anti-slip and oil-resistant Vibram® TPU sole,
  • self-cleaning tread that does not leave traces on surfaces,
  • inner inserts equipped with shock absorbers made of Poron® material, which is extremely soft and durable,
  • perforation on the surface of the insert ensures good ventilation and air circulation,
  • composite toe cap and anti-perforation insole ensure low weight of the shoe,
  • wide toe structure provides plenty of space for fingers,
  • meet the requirements of EN ISO 20345:2011 S3, SRC,
  • manufacturer code SG74003.

Classic-looking Atlas S3 work shoes by Solid Gear are made of the highest quality premium grain leather, which is easy to clean and maintain and, of course, resistant to mechanical damage. The toe cap and anti-perforation insole made of composite guarantee the low weight of the shoe. The sole of the world-famous Vibram® brand is resistant to oils and greases and is non-slip. The tread is self-cleaning, so you can easily get rid of mud from your sole. The Vibram® sole, proven in outdoor and trekking shoes, provides traction even in very bad weather conditions on ice and snow. The premium grain leather used prevents water from penetrating and promotes ventilation. Of course, we recommend systematic impregnation.

Product Details

Solid Gear
7340093610186

Data sheet

Footwear protection class
S3
Toe cap
Composite
Material
Leather
Anti-puncture insert
Yes
Fitting system
Laces
Waterproof membrane
No
Standard
SRC

Returns FAQ:

1. Do you offer free returns?

Yes you can return product using free return label or send your parcel to our natonal warehouse in your country.

2. How can I exchange my product?

Well the best way is to just purchase the one you like and shipp back the item that you don't like. We do not "exchange" products.

3. How long I have to wait to be refunded?

Usually we need 3-4 days to refund your order. Please be sure you filled in and attached your return form. It will make a huge difference for processing your refund.

4. Do I need original invoice to return my order?

Sure you do not! As long as you have an order number, return form or any other identifier for your order we will find you and we will refund you!

Warranty FAQ:

  • What is the warranty for my order? 24 months.
  • When will I get an answer for my warranty claim? No longer than 14 days.
  • Do I need an invoice or receipt to file a claim? No.
  • Do I need to send product to Baltic Workwear? No. Most of claims we do via our electronic system. All you need to do is provide us good quality pictures of product. 
  • Do I pay for warranty procedure? No. It is free.
  • Do I need an original box? No.

Other products in the same category...

Check our other products recomended for you...

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

Product Comments

Comments (2)
(2)

You might also like